SDS - FloraTech AquaFirm Advanced Liquid Penetrant - 260805
Applies to AquaFirm | Advanced Liquid Soil Penetrant
Document contents
Text extracted from the source document for accessibility and reference. Always consult the original safety data sheet above for the authoritative version.
SAFETY DATA SHEET
FloraTech AquaFirm Advanced Liquid Penetrant
Prepared in accordance with the Work Health and Safety Regulations and the Globally Harmonised System of Classification and Labelling of Chemicals (GHS) Revision 7
Section 1: Identification of the Substance/mixture and of the Supplier
1.1 Product Identifier
| Product name | FloraTech AquaFirm Advanced Liquid Penetrant |
| Product code | FTCAFIRM |
| Other names | None |
| Chemical synonyms | Non-ionic surfactant blend / ethoxylated fatty alcohols |
| Product definition | Mixture |
1.2 Relevant Identified Uses of the Substance or Mixture and Uses Advised Against
| Identified uses | Turf wetting agent and soil penetrant. Diluted in water and applied to turf at the recommended rates. |
| Uses advised against | Any use other than that recommended by the supplier on the product label and technical literature. |
| Company | Fernland Agencies Pty Ltd |
| ABN | 89 144 613 936 |
| Address | 31-35 Paulger Flat Road, Yandina QLD 4561, Australia |
1.4 Emergency Telephone Number
| Poisons Information Centre | 13 11 26 (Australia — available 24 hours) |
| Emergency services | 000 (Fire, Police, Ambulance) |
| Supplier | (Monday to Friday, 07:30 – 16:30 AEST) |
Section 2: Hazard(s) Identification
2.1 Classification of the Substance or Mixture
Classified as a hazardous chemical according to the Work Health and Safety Regulations and the GHS Revision 7 criteria adopted in Australia.
| Hazard class | Category | Hazard statement |
|---|---|---|
| Acute toxicity — oral | Category 4 | H302 — Harmful if swallowed |
| Serious eye damage/eye irritation | Category 1 | H318 — Causes serious eye damage |
| Hazardous to the aquatic environment — long-term (chronic) | Category 3 | H412 — Harmful to aquatic life with long lasting effects |
2.2 Label Elements
SIGNAL WORD: DANGER
[Pictograms: GHS05 — Corrosion, GHS07 — Exclamation mark]
| Hazard statements | H302 Harmful if swallowed. H318 Causes serious eye damage. H412 Harmful to aquatic life with long lasting effects. |
| Precautionary statements — prevention | P264 Wash hands and exposed skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P273 Avoid release to the environment. P280 Wear protective gloves, protective clothing and eye/face protection. |
| Precautionary statements — response | P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P310 Immediately call a POISONS INFORMATION CENTRE (13 11 26) or doctor. P301+P312 IF SWALLOWED: Call a POISONS INFORMATION CENTRE (13 11 26) or doctor if you feel unwell. P330 Rinse mouth. |
| Precautionary statements — disposal | P501 Dispose of contents and container in accordance with State and local regulations. |
| Poisons Schedule (SUSMP) | The ingredients of this product are not specifically listed in the Standard for the Uniform Scheduling of Medicines and Poisons. |
2.3 Other Hazards
- Spills create a high risk of slipping, particularly in combination with water. Contain and clean up promptly.
- The surfactant in this product is readily biodegradable (see Section 12.2).
- Does not meet the criteria for a persistent, bioaccumulative and toxic (PBT) or very persistent, very bioaccumulative (vPvB) mixture.
- No specific dangers are known beyond those stated, provided the storage and handling requirements in Section 7 are observed.
Section 3: Composition/information on Ingredients
Substance or mixture: Mixture. Chemical nature: ethoxylated fatty alcohols (proprietary) in water.
| Ingredient | CAS No. | Proportion (% w/w) | Ingredient classification (GHS Rev 7) |
|---|---|---|---|
| Poly(oxy-1,2-ethanediyl), alpha-(2-propylheptyl)-omega-hydroxy | 160875-66-1 | 25 – 50 | Acute Toxicity (oral) Cat. 4 — H302 Serious Eye Damage Cat. 1 — H318 |
| Ingredients determined not to be hazardous | — | Balance | Not classified |
No additional ingredients are present which, within the current knowledge of the supplier and at the concentrations applicable, are classified as hazardous to health or the environment or have been assigned a workplace exposure standard, and which therefore require disclosure in this section.
Section 4: First Aid Measures
For all exposures, contact the Poisons Information Centre on 13 11 26 for advice.
4.1 Description of First Aid Measures
| Eye contact | THIS PRODUCT CAUSES SERIOUS EYE DAMAGE. Immediately flush the eyes with plenty of running water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Remove contact lenses if present and easy to do. Continue rinsing. Seek immediate medical attention. |
| Inhalation | Remove the affected person to fresh air and keep at rest in a position comfortable for breathing. Keep the patient calm and warm. Seek medical attention if symptoms develop or persist. |
| Skin contact | Immediately wash the contaminated skin with plenty of water. Remove contaminated clothing and footwear. Apply a sterile dressing to any damaged skin. Seek medical attention if symptoms develop. Launder contaminated clothing before re-use. |
| Ingestion | Immediately rinse the mouth thoroughly with water. Do NOT induce vomiting unless directed to do so by medical personnel. If the person is conscious, give 200–300 mL of water to drink. Never give anything by mouth to an unconscious person. Seek immediate medical attention and contact the Poisons Information Centre on 13 11 26. |
| First aid facilities | An eyewash station and safety shower must be available in the immediate work area and maintained in accordance with AS 4775. |
4.2 Most Important Symptoms and Effects, Both Acute and Delayed
Eye contact causes serious, potentially irreversible eye damage, with pain, redness, watering and impaired vision. Ingestion is harmful and may cause irritation of the mouth, throat and gastrointestinal tract, together with nausea. Prolonged or repeated skin contact may cause slight irritation. No delayed effects are known beyond those stated.
4.3 Indication of Any Immediate Medical Attention and Special Treatment Needed
| Notes to physician | Treat symptomatically. There is no specific antidote. Eye injury requires urgent assessment and may require ophthalmological referral. Contact the Poisons Information Centre on 13 11 26 immediately if significant quantities have been ingested or inhaled. |
| Specific treatments | No specific treatment. |
Section 5: Fire-fighting Measures
5.1 Extinguishing Media
| Suitable extinguishing media | Use an extinguishing agent appropriate to the surrounding fire — foam, water fog, dry chemical powder, carbon dioxide, other inert gases, sand or earth. Foam and water fog should be applied only by trained personnel. |
| Unsuitable extinguishing media | Do not direct a solid water jet at the burning product; this may cause splattering and spread the fire. Avoid the simultaneous use of foam and water on the same surface, as water destroys the foam blanket. |
5.2 Special Hazards Arising from the Substance or Mixture
| Hazards from the product | Not classified as flammable or combustible. In a fire or if strongly heated, pressure will build within the container and the container may rupture. |
| Hazardous combustion products | Incomplete combustion liberates harmful vapours, fumes and smoke, which may include carbon monoxide and carbon dioxide. |
5.3 Advice for Fire-fighters
| Special precautions | Isolate the scene promptly and remove all persons from the vicinity of the incident. No action is to be taken that involves personal risk or is undertaken without suitable training. Prevent fire-fighting water run-off from entering drains, waterways and soil. |
| Protective equipment for fire-fighters | Wear self-contained breathing apparatus (SCBA) with full face-piece operated in positive pressure mode, together with full protective clothing including helmet, protective boots and gloves conforming to AS/NZS 4967. |
| Additional information | Do not pressurise, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition. |
Section 6: Accidental Release Measures
High risk of slipping on any spillage or leakage — the product forms slippery surfaces in combination with water.
6.1 Personal Precautions, Protective Equipment and Emergency Procedures
| For non-emergency personnel | No action is to be taken that involves personal risk or is undertaken without suitable training. Evacuate the surrounding area and keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilt material. Put on appropriate personal protective equipment as described in Section 8, including eye and face protection. |
| For emergency responders | Refer to Section 8 for guidance on suitable and unsuitable protective materials and for additional hygiene measures. Keep people and animals away from the spill area. |
6.2 Environmental Precautions
Avoid dispersal of spilt material and run-off, and prevent contact with soil, waterways, drains and sewers. Do not discharge to drains, surface water or groundwater. If the product enters surface water or groundwater, or has otherwise caused environmental pollution, notify the relevant State environmental authority and the local water authority.
6.3 Methods and Material for Containment and Cleaning Up
| Small spills | Stop the leak if it is safe to do so. Move containers away from the spill area. Collect with a suitable inert absorbent material and place in a labelled container for disposal. Dispose of via a licensed waste disposal contractor. |
| Large spills | Stop the leak if it is safe to do so. Bund or dyke the spillage and pump off the bulk product into a suitable container. Collect residues with a suitable inert absorbent material. Dispose of the absorbed material in accordance with State and local regulations, via a licensed waste disposal contractor. |
| After clean-up | Wash the affected area thoroughly to remove any residual slip hazard, taking care to prevent wash water entering drains or waterways. |
6.4 Reference to Other Sections
See Section 1 for emergency contact details, Section 8 for personal protective equipment and Section 13 for waste treatment information.
Section 7: Handling and Storage
7.1 Precautions for Safe Handling
| Protective measures | Put on appropriate personal protective equipment as described in Section 8. Avoid contact with the eyes — this product causes serious eye damage. Do not swallow. Keep containers closed when not in use. Clean up spills promptly to eliminate slip hazards. |
| General occupational hygiene | Eating, drinking and smoking are to be prohibited in areas where this material is handled, stored or processed. Workers are to wash their hands and face before eating, drinking or smoking. Remove contaminated clothing and protective equipment before entering eating areas. |
7.2 Conditions for Safe Storage, Including Any Incompatibilities
Store in the original, correctly labelled container in a dry, cool, well-ventilated area away from incompatible materials (see Section 10) and away from food and drink. Protect from moisture — the product absorbs humidity from the air. Protect against fire, explosion and static discharge. Avoid storage temperatures above 70 °C. Keep containers tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate secondary containment to avoid environmental contamination. Store in accordance with State and local regulations.
7.3 Specific End Use(s)
This product is designed as a turf wetting agent and soil penetrant, to be diluted in water prior to application to turf at the recommended rates. Observe safe handling practices and use the personal protective equipment specified in Section 8.
Section 8: Exposure Controls/personal Protection
8.1 Control Parameters
| Workplace exposure standards | No workplace exposure standards have been assigned to the ingredients of this product in the Safe Work Australia Workplace Exposure Standards for Airborne Contaminants. |
| Biological limit values | No biological limit values have been assigned. |
8.2 Exposure Controls
| Engineering controls | Use in a well-ventilated area. Natural ventilation is normally adequate for routine handling. Where mists or aerosols may be generated, use local exhaust ventilation. An eyewash station and safety shower must be provided in the immediate work area (AS 4775). |
| Eye and face protection | MANDATORY. Wear tightly fitting chemical splash goggles complying with AS/NZS 1337.1, together with a face shield. This product causes serious eye damage. |
| Hand protection | Wear chemical-resistant gloves selected and used in accordance with AS/NZS 2161.10.1. Nitrile rubber (NBR) with a minimum thickness of 0.4 mm is recommended for prolonged or direct contact. Inspect gloves before use and replace when damaged or degraded. |
| Body protection | Wear protective clothing appropriate to the task and the potential for exposure, in accordance with AS/NZS 4501.1 and AS/NZS 4501.2 — for example a chemical-resistant apron, coveralls and protective footwear. Closed work clothing is required in addition to the stated personal protective equipment. |
| Respiratory protection | Not normally required where ventilation is adequate. Where mists or aerosols may be generated, wear a Class P2 particulate respirator selected, used and maintained in accordance with AS/NZS 1715 and AS/NZS 1716. |
| Hygiene measures | Wash hands thoroughly after handling and before eating, drinking or smoking. No eating, drinking, smoking or tobacco use at the place of handling. Remove and launder contaminated clothing before re-use. Handle in accordance with good industrial hygiene and safety practice. |
| Environmental exposure controls | Avoid release to the environment. Use containment and bunding where appropriate to prevent product entering drains, waterways or soil. |
Section 9: Physical and Chemical Properties
9.1 Information on Basic Physical and Chemical Properties
| Physical state | Liquid |
| Colour | Colourless to pale yellow |
| Odour | Characteristic |
| Odour threshold | No data available |
| pH | Approximately 7 (50 g/L at 23 °C) |
| Melting point/freezing point | Approximately 3 °C |
| Initial boiling point and boiling range | 200 °C |
| Flash point | > 100 °C |
| Evaporation rate | No data available |
| Flammability (solid, gas) | Not self-igniting. Not classified as flammable. |
| Upper/lower flammability or explosive limits | No data available |
| Vapour pressure | No data available |
| Vapour density | No data available |
| Relative density | Approximately 1 g/cm³ at 25 °C |
| Solubility | Soluble in water |
| Partition coefficient: n-octanol/water | No data available |
| Auto-ignition temperature | No data available |
| Decomposition temperature | > 300 °C |
| Viscosity | No data available |
| Explosive properties | Not explosive |
| Oxidising properties | Not oxidising |
| Particle characteristics | Not applicable — product is a liquid. |
9.2 Other Information
The product is hygroscopic and absorbs moisture from the air.
Section 10: Stability and Reactivity
| 10.1 Reactivity | No specific test data relating to reactivity are available for this product or its ingredients. |
| 10.2 Chemical stability | The product is stable under normal conditions of storage and use. |
| 10.3 Possibility of hazardous reactions | Under normal conditions of storage and use, hazardous reactions will not occur. |
| 10.4 Conditions to avoid | Humidity and atmospheric moisture. Excessive heat, open flames, sources of ignition and static discharge. Temperatures above 70 °C. |
| 10.5 Incompatible materials | Caustics, halogens, strong alkalis, acids and reactive chemicals. |
| 10.6 Hazardous decomposition products | None expected if stored and handled as directed. When heated to decomposition, the product may release oxides of carbon, smoke and irritating vapours. |
Section 11: Toxicological Information
11.1 Information on Toxicological Effects
This product has not been tested as a mixture. The toxicological statements have been derived from products of similar structure and composition, and from the classification of the ingredients.
| Endpoint | Result |
|---|---|
| Acute toxicity — oral | Classified as Acute Toxicity (oral) Category 4 — harmful if swallowed. LD50 (rat, oral): > 2,000 – 5,000 mg/kg. |
| Acute toxicity — dermal | No data available. Not classified. |
| Acute toxicity — inhalation | No data available. Not classified. |
| Skin corrosion/irritation | Slightly irritating (rabbit, OECD Guideline 404). Not classified. |
| Serious eye damage/eye irritation | Irreversible damage (rabbit, OECD Guideline 405). Classified as Serious Eye Damage Category 1. |
| Respiratory or skin sensitisation | No data available. Not classified. |
| Germ cell mutagenicity | No data available. Not classified. |
| Carcinogenicity | No data available. Not classified. |
| Reproductive toxicity | No data available. Not classified. |
| STOT — single exposure | No data available. Not classified. |
| STOT — repeated exposure | No data available. Not classified. |
| Aspiration hazard | No aspiration hazard expected. Not classified. |
Likely routes of exposure Eye contact, skin contact, inhalation of mists or aerosols, and ingestion.
Symptoms related to the physical, chemical and toxicological characteristics Eye contact causes serious, potentially irreversible damage with pain, redness, watering and impaired vision. Ingestion is harmful and may cause irritation of the mouth, throat and gastrointestinal tract, together with nausea. Skin contact may cause slight irritation. No chronic health effects are known.
Section 12: Ecological Information
12.1 Toxicity
Classified as Hazardous to the aquatic environment — long-term (chronic) Category 3: harmful to aquatic life with long lasting effects.
| Endpoint | Species | Result |
|---|---|---|
| LC50 (96 h) | Fish (Leuciscus idus) | > 1 – 10 mg/L |
| EC50 (48 h) | Aquatic invertebrates (Daphnia, static) | > 1 – 10 mg/L |
| EC50 (96 h) | Aquatic plants (algae) | > 1 – 10 mg/L |
| NOEC (96 h) | Selenastrum capricornutum | > 0.1 – 1 mg/L |
| EC10 (0.5 h) | Micro-organisms (activated sludge) | > 10,000 mg/L |
| Chronic toxicity | Fish | No data available |
| Chronic toxicity | Aquatic invertebrates | No data available |
| Terrestrial toxicity | — | No data available |
12.2 Persistence and Degradability
Elimination: ≥ 90% (bismuth-active substance, modified OECD 303A). Biodegradation: ≥ 60% CO₂ formation relative to the theoretical value over 28 days (OECD 301B / ISO 9439). The surfactant is readily biodegradable.
12.3 Bioaccumulative Potential
Accumulation in organisms is not expected.
12.4 Mobility in Soil
The substance will not evaporate into the atmosphere from a water surface. Adsorption to the solid soil phase is possible.
12.5 Results of Pbt and Vpvb Assessment
The product does not meet the criteria for a PBT or vPvB mixture.
12.6 Other Adverse Effects
The product does not contain any ozone-depleting substances. Do not discharge the product into the environment without control.
12.7 Additional Information
Chemical Oxygen Demand (COD): 2,600 mg/g. Adsorbable organically-bound halogen (AOX): the product contains no organically-bound halogen. Inhibition of degradation activity in activated sludge is not anticipated where low concentrations are correctly introduced. Treatment in biological waste water treatment plants must be carried out in accordance with the requirements of the relevant State authority and any local trade waste conditions.
Section 13: Disposal Considerations
13.1 Waste Treatment Methods
| Product disposal | The generation of waste should be avoided or minimised wherever possible. Dispose of surplus and non-recyclable product by incineration or via a licensed waste disposal contractor. Disposal must at all times comply with the Environmental Protection Act and Regulations applicable in the relevant State or Territory and with any local authority requirements. Do not discharge to drains, surface water or groundwater. |
| Container disposal | Uncontaminated packaging may be re-used. Triple rinse containers where practicable and add the rinsate to the application tank. Packaging that cannot be cleaned must be disposed of in the same manner as the contents. Recycle where facilities exist; incineration or landfill should only be considered where recycling is not feasible. |
| Special precautions | This material and its container must be disposed of in a safe way. Empty containers and liners may retain product residues. |
Section 14: Transport Information
Classified in accordance with the Australian Code for the Transport of Dangerous Goods by Road & Rail (ADG Code), Edition 7.8.
| ADG Code (Road & Rail) | IMDG (Sea) | IATA/ICAO (Air) | |
|---|---|---|---|
| 14.1 UN number | Not applicable | Not applicable | Not applicable |
| 14.2 UN proper shipping name | Not applicable | Not applicable | Not applicable |
| 14.3 Transport hazard class(es) | Not applicable | Not applicable | Not applicable |
| 14.4 Packing group | Not applicable | Not applicable | Not applicable |
| 14.5 Environmental hazards | No | Not a marine pollutant | No |
| Hazchem code | Not applicable | — | — |
This product is NOT classified as a Dangerous Good for transport by road, rail, sea or air.
14.6 Special Precautions for User
Transport in accordance with the ADG Code. Ensure containers are secure and upright during transport, and are not damaged. Do not transport with food or feedstuffs.
14.7 Transport in Bulk According to Imo Instruments
Not evaluated.
Section 15: Regulatory Information
15.1 Safety, Health and Environmental Regulations Specific to the Substance or Mixture
| Classification | Classified as a hazardous chemical according to the Work Health and Safety Regulations, applying the GHS Revision 7 criteria. |
| WHS Regulations | Work Health and Safety Regulations (Commonwealth, State and Territory) — Hazardous Chemicals. This product must be recorded on the workplace hazardous chemicals register, and the quantity held assessed against the placarding and manifest thresholds. |
| Poisons Schedule | The ingredients of this product are not specifically listed in the Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP / Poisons Standard). |
| Dangerous Goods | Not classified as a Dangerous Good under the ADG Code, Edition 7.8. |
| Industrial chemicals (AICIS) | The industrial chemicals in this product are introduced into Australia under the Industrial Chemicals Act 2019, administered by the Australian Industrial Chemicals Introduction Scheme (AICIS). Fernland Agencies Pty Ltd distributes this product within Australia; obligations relating to the introduction of the industrial chemicals contained in it rest with the introducer. |
| Agricultural chemicals | Not a registered agricultural chemical product under the Agricultural and Veterinary Chemicals Code Act 1994. APVMA registration is not required for this product. |
| Environmental regulations | Environmental Protection Act and Regulations applicable in the relevant State or Territory. |
15.2 Chemical Safety Assessment
A chemical safety assessment is not required for this mixture.
Section 16: Other Information
16.1 Document Control
| Version | 2.0 |
| Date of issue | 5 August 2026 |
| Date of previous issue | 1 February 2023 |
| Review period | This SDS is to be reviewed at intervals of no more than five years. |
| Prepared by | Fernland Agencies Pty Ltd |
16.2 Changes from Previous Version
Revised and brought into line with current Australian WHS Regulations and GHS Revision 7 requirements. The previous version was prepared to the European CLP/REACH format and referenced European and United Kingdom standards, agencies and legislation; these have been replaced throughout with their Australian equivalents, including the ADG Code, AS/NZS standards in Section 8, SUSMP and AICIS references in Section 15, and the Poisons Information Centre as the emergency contact. Label elements in Section 2 have been completed to reflect the full GHS Revision 7 pictogram and precautionary statement requirements for the assigned classification.
16.3 Abbreviations and Acronyms
| Abbreviation | Meaning |
|---|---|
| ADG Code | Australian Code for the Transport of Dangerous Goods by Road & Rail |
| AICIS | Australian Industrial Chemicals Introduction Scheme |
| AOX | Adsorbable organically-bound halogen |
| APVMA | Australian Pesticides and Veterinary Medicines Authority |
| AS/NZS | Australian/New Zealand Standard |
| CAS | Chemical Abstracts Service |
| COD | Chemical oxygen demand |
| EC10 / EC50 | Effective concentration affecting 10% / 50% of the test population |
| GHS | Globally Harmonised System of Classification and Labelling of Chemicals |
| IATA | International Air Transport Association |
| IMDG | International Maritime Dangerous Goods Code |
| LC50 | Median lethal concentration |
| LD50 | Median lethal dose |
| NOEC | No observed effect concentration |
| OECD | Organisation for Economic Co-operation and Development |
| PBT | Persistent, bioaccumulative and toxic |
| PPE | Personal protective equipment |
| SCBA | Self-contained breathing apparatus |
| STOT | Specific target organ toxicity |
| SUSMP | Standard for the Uniform Scheduling of Medicines and Poisons |
| vPvB | Very persistent and very bioaccumulative |
| WHS | Work Health and Safety |
16.4 Contact for Further Information
| For a copy of this SDS | | |
16.5 Disclaimer
To the best of our knowledge, the information contained in this Safety Data Sheet is accurate at the date of issue. However, Fernland Agencies Pty Ltd assumes no liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of the suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
END OF SAFETY DATA SHEET