SDS - GNP DMR Mix - 250720
Applies to DMR Fertiliser & Wetting Agent Mix
Document contents
Text extracted from the source document for accessibility and reference. Always consult the original safety data sheet above for the authoritative version.
Wholesale suppliers servicing the Horticultural, Nursery, Flower Growing and Landscape Industries
Garden Nursery Products
Facsimile
Material Safety Data Sheet – Gnp Dmr Soil Conditioning Blend
This revision issued: 20/07/2025
Section 1 – Identification of Material and Supplier
Supplier name: Garden Nursery Products Address: 9 Wrights Place, Arundel, Qld, 4214 Synonyms: CB/RB0703 Product Use: Fertiliser
Section 2 - Hazards Identification
NOT CLASSIFIED AS HAZARDOUS ACCORDING TO NOHSC CRITERIA NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF ADG CODE UN No. None Allocated Hazchem Code None Allocated Pkg Group None Allocated DG Class None Allocated Subsidiary Risks None Allocated EPG None Allocated
Section 3 – Composition / Information on Ingredients
| Ingredients | CAS No |
|---|---|
| Alroc No3 | 1008 |
| Supasorb Water Crystals | Not available |
| Multicote 4 month | 57-13-6 |
| Sulphate of Potash | 7778-80-5 |
| Urea Granular | 57-13-6 |
| Trace Elements | Not available |
| DAP | 7783-28-0 |
| Iron Sulphate Granular | 1332372/7782630 |
This is a commercial product whose exact ratio of components may vary slightly. Minor quantities of other non-hazardous ingredients are also possible.
Section 4 – First Aid Measures
General Information: You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by this product. The number is 131126 from anywhere in Australia and is available at all times. Have this MSDS with you when you call.
Page: 1 of 4
Wholesale suppliers servicing the Horticultural, Nursery and Flower Growing Industries
Inhalation: If over exposure occurs, leave area immediately. If irritation persists seek medical attention.
Skin Contact: Remove contaminated clothing and gently flush affected areas with water. Seek medical attention if irritation develops. Launder clothing before reuse.
Eye Contact: Flush gently with running water. Seek medical attention if irritation develops.
Ingestion: For advice contact a Poisons Information Centre on 131126 or a doctor.
Advice to Doctor: Treat symptomatically.
Section 5 – Fire Fighting Measures
Flammability: Non Flammable. No fire or explosion hazard exists. May evolve ammonia and oxides of nitrogen, phosphorus and potassium when heated to decomposition.
Fire and Explosion: Non-flammable. No fire or explosion hazard exists.
Extinguishing: Non flammable
Hazchem Code: None allocated
Section 6 – Accidental Release Measures
Spillage: If spilt, wear dust proof goggles, gloves and respirator (where dust inhalation risk exists) ventilate spillage area. Collect and place in sealable containers for disposal. Avoid generating dust.
Section 7 – Handling and Storage
Storage: Store in cool, dry area removed from foodstuffs. Ensure containers are labelled, protected from physical damage and sealed when not in use. Do not allow to come into contact with water either from rain, condensation or the surface on which it is stored. Bagged fertilisers should be stored under cover and out of direct sunlight (which degrades polywoven bags). If stored in the open, do so for a short period only and cover with a tarpaulin. High stacking should be avoided as pressure promotes caking. Store away from farm chemicals e.g. insecticides, fungicides and herbicides. This product when stored in a confined, unventilated space can give off ammonia or other odour and lead to the depletion of oxygen within this space and other confined areas.
Handling: Before use carefully read the product label. Use safe work practices are recommended to avoid eye or skin contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in contaminated areas.
Section 8 – Exposure Controls and Personal Protection
The following Australian Standards will provide general advice regarding safety clothing and equipment: Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Industrial clothing: AS 2919, Industrial Eye Protection: AS 1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS 2210.
Ventilation: Do not inhale dust. Use with natural ventilation. Use appropriate safe work practices to reduce dust levels. Maintain dust levels below the recommended exposure standard.
Page: 2 of 4
Wholesale suppliers servicing the Horticultural, Nursery and Flower Growing Industries
PPE: Personal Protective Equipment is not required under normal conditions of use. Where an inhalation risk exists, wear a Class P1 (Particulate) Respirator. Individuals with sensitive skin should consider wearing rubber or PVC gloves.
Section 9 – Physical and Chemical Properties:
Appearance: Granular blend of white, grey and brown Odour: Mild PH: Not Available Vapour Pressure: Not Available Vapour Density: Not Available Melting Point: Not Available Boiling Point: Not Relevant Water Solubility: Not Available Specific Gravity: Not Available % Volatiles: Not Available Flammability: Non Flammable Flash Point: Not Relevant Upper Explosion Limit: Not Relevant Lower Explosion Limit: Not Relevant Auto ignition Temperature: Not Available
Section 10 – Stability and Reactivity
Reactivity: Compatible with most commonly used materials
Fire Decomposition: May evolve ammonia and oxides of nitrogen, potassium and phosphorus when heated to decomposition.
Section 11 – Toxicological Information
Health Hazard Summary: Low toxicity. This product may only present a hazard with eye contact, prolonged and repeated skin contact or with dust inhalation at high levels.
Eye: Low to moderate irritant. Exposure may result in irritation, pain and redness.
Inhalation: Low irritant. Over exposure may result in mucous membrane irritation of the nose and throat with coughing.
Skin: Non – low irritant. Over exposure may result in slight irritation. Some individuals with sensitive skin may experience adverse skin reactions and would be advised to discontinue use.
Ingestion: Low toxicity. With large doses, ingestion may result in nausea, vomiting and gastrointestinal irritation.
Toxicity Data: No LD50 data available for this product.
Section 12 – Ecological Information
Environment: Avoid contamination of waterways. Fertilisers, particularly those containing nitrogen and phosphorus can stimulate weed and algal growth in static surface waters. Nitrogen fertilisers can also contain or form Nitrate which can contaminate surface and ground water. High nitrate concentrations may render the water unsuitable for human and livestock consumption.
Section 13 – Disposal Considerations
Disposal: There are many pieces of legislation covering waste disposal and they differ in each state and territory, so each user must refer to laws operating in their area. The Hierarchy of Controls seems to be common – the user should investigate: Reduce, Reuse, and Recycle and only if all else fails should disposal be considered.
Section 14 – Transport Information
ADG Code: This product is NOT classified as a Dangerous Good. No special transport conditions are necessary unless required by other regulations.
Page: 3 of 4
Wholesale suppliers servicing the Horticultural, Nursery and Flower Growing Industries
Shipping Name: None allocated Subsidiary Risk: None allocated Hazchem Code: None allocated Pkg Group: None allocated DG Class: None allocated UN No: None allocated EPG: None allocated
Section 15 – Regulatory Information
Poison Schedule: A poison schedule number has not been allocated to this product using the criteria in the Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP)
Section 16 – Other Information
This MSDS contains only safety-related information. For other data see product literature.
This MSDS summarises our best knowledge of the health and safety hazard information of the product and how to safely handle and use the product in the workplace. Each user must review this MSDS in the context of how the product will be handled and used in the workplace.
If clarification or further information is needed to ensure that an appropriate risk assessment can be made, the user should contact this company so we can attempt to obtain additional information from our suppliers.
Our responsibility for products sold is subject to our standard terms and conditions, a copy of which is sent to our customers and is also available on request.
Please read all labels carefully before using product.
This MSDS is prepared in accord with the ASCC (Office of the Australian Safety and Compensation Council) document “National Code of Practice for the Preparation of Material Safety Data Sheets” 2nd Edition (NOHSC:2011(2008))