SDS - Phosfusion 600 Fungicide - 260213
Applies to Phosfusion 600 | Fungicide
Document contents
Text extracted from the source document for accessibility and reference. Always consult the original safety data sheet above for the authoritative version.
Page 1 of 5
Safety Data Sheet according to WHS Regulations
Date of issue: 13.02.2026 Revision: 13.02.2026
62.0.7
1 Identification
Product name: PHOSFUSION 600 FUNGICIDE
APVMA approval: 67596
Relevant identified uses of the substance or mixture and uses advised against fungicide
2 Hazard(s) Identification
Classification of the substance or mixture Classified as NOT Hazardous according to the Globally Harmonised System of Classification and Labelling of Chemicals (GHS) and Safe Work Australia criteria.
Not classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail (7th edition), IATA and IMDG/IMSBC.
Signal word None
Hazard statements None
Precautionary statements P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P103 Read label before use.
3 Composition and Information on Ingredients
Chemical characterisation: Mixtures Description: Mixture of substances listed below with nonhazardous additions.
Hazardous components: None
Non-hazardous components:
| CAS No. | Component | Proportion |
|---|---|---|
| 13492-26-7 | dipotassium phosphite | 10–50% |
| 13977-65-6 | potassium dihydrogen phosphite | 10–50% |
4 First Aid Measures
Following inhalation: If inhaled, remove to fresh air. Seek medical attention if breathing problems develop.
Following skin contact: After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water. Get medical attention if skin irritation occurs and persists.
Following eye contact: Remove contact lenses, if present and easy to do. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. Get medical attention if irritation persists.
Following ingestion: Keep at rest. Rinse mouth with water (only if the person is conscious). Give a glass of water to drink in small sips. Do NOT induce vomiting. Seek medical attention if feeling unwell.
Most important symptoms and effects, both acute and delayed May cause eye irritation. May cause skin irritation. Inhalation of mist may cause respiratory irritation. May cause gastrointestinal irritation, nausea, diarrhoea and vomiting.
(Contd. on page 2)
Page 2 of 5
Safety Data Sheet according to WHS Regulations
Date of issue: 13.02.2026 Revision: 13.02.2026
Product name: PHOSFUSION 600 FUNGICIDE
(Contd. of page 1)
62.0.7
5 Fire Fighting Measures
Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. For safety reasons unsuitable extinguishing agents: Water with full jet
Special hazards arising from the substance or mixture Product is not flammable. Hazardous combustion products include oxides of phosphorus, oxides of nitrogen and ammonia.
Advice for firefighters In case of fire and/or explosion do not breathe fumes. Co-ordinate firefighting measures to the fire surroundings. Do not allow firefighting water to enter drains or water courses. Collect contaminated firefighting water separately. Fight fire with normal precautions from a reasonable distance.
6 Accidental Release Measures
Personal precautions, protective equipment and emergency procedures Ventilate affected area. Prevent skin contact. Wearing of suitable protective equipment (including personal protective equipment referred to under Section 8 of the safety data sheet) to prevent any contamination of skin, eyes and personal clothing. Collection and use of expertise.
Environmental precautions: Dilute with plenty of water. Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Methods and material for containment and cleaning up: Stop leak if safe to do so and absorb spill with sand, earth, vermiculite or some other absorbent material. Collect the spilled material and place into a suitable container for disposal. Wash area after spill.
7 Handling and Storage
Precautions for safe handling Use of safe work practices are recommended to avoid eye or skin contact and inhalation of mist or spray. Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Conditions for safe storage, including any incompatibilities Store in a cool, dry and well-ventilated area. Keep in the original container, tightly closed when not in use. Protect from freezing. Keep away from strong oxidising agents, strong bases and strong acids.
8 Exposure Controls and Personal Protection
Ingredients with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
Exposure controls Ensure adequate ventilation of the working area.
Respiratory protection: Respiratory protection is not required under normal use conditions. In case of inadequate ventilation wear respiratory protection. Filter P2 (against particles) according to AS/NZS1716 standards.
Protection of hands: Wear protective gloves. Recommended material: neoprene, nitrile rubber. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Wash hands and face thoroughly after handling.
(Contd. on page 3)
Page 3 of 5
Safety Data Sheet according to WHS Regulations
Date of issue: 13.02.2026 Revision: 13.02.2026
Product name: PHOSFUSION 600 FUNGICIDE
(Contd. of page 2)
62.0.7
Eye protection: Wear eye/face protection. Use safety goggle with side protection. Use protective eyewear to guard against splash of liquids.
Body protection: Light weight protective clothing.
9 Physical and Chemical Properties
Appearance: Form: Liquid Colour: Off-white to clear Odour: Odourless pH-value: 7.1 (10%) Melting point/freezing point: No information available Initial boiling point and boiling range: approx. 100 °C Flash point: Does not flash up to boiling Flammability: Product is not flammable Decomposition temperature: No information available Density: 1.56 g/cm³ Solubility in / Miscibility with water: Fully miscible
10 Stability and Reactivity
Reactivity No further relevant information available. Chemical stability Stable at ambient temperature and under normal conditions of storage and use. Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. Possibility of hazardous reactions No dangerous reactions known. Conditions to avoid Keep away from incompatible materials. Protect from freezing. Incompatible materials: Strong oxidising agents, strong acids and strong bases. Hazardous decomposition products: Oxides of phosphorus, oxides of nitrogen and ammonia.
11 Toxicological Information
LD/LC50 values relevant for classification:
| CAS No. / Component | Type | Value |
|---|---|---|
| 13492-26-7 dipotassium phosphite | Oral | LD50 5,000 mg/kg (rat) |
Acute toxicity Based on available data, the classification criteria are not met. Skin corrosion/irritation Based on available data, the classification criteria are not met. Serious eye damage/irritation Based on available data, the classification criteria are not met. Respiratory or skin sensitisation Based on available data, the classification criteria are not met. Germ cell mutagenicity Based on available data, the classification criteria are not met. Carcinogenicity Based on available data, the classification criteria are not met. Reproductive toxicity Based on available data, the classification criteria are not met. STOT-single exposure Based on available data, the classification criteria are not met. STOT-repeated exposure Based on available data, the classification criteria are not met. Aspiration hazard Based on available data, the classification criteria are not met.
(Contd. on page 4)
Page 4 of 5
Safety Data Sheet according to WHS Regulations
Date of issue: 13.02.2026 Revision: 13.02.2026
Product name: PHOSFUSION 600 FUNGICIDE
(Contd. of page 3)
62.0.7
12 Ecological Information
Toxicity The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment.
Aquatic toxicity:
| CAS No. / Component | Type | Value |
|---|---|---|
| 13492-26-7 dipotassium phosphite | LC50/96h | 200 mg/l (fish) |
Persistence and degradability Easily biodegradable Bioaccumulative potential No further relevant information available. Mobility in soil No further relevant information available. Results of PBT and vPvB assessment Does not contain a PBT-/vPvB-substance at a concentration of ≥ 0,1%. Other adverse effects No further relevant information available.
13 Disposal Considerations
Waste treatment methods Recommendation Dispose according to applicable local and state government regulations. Do not reuse container. Completely empty container into application equipment. Thoroughly rinse containers, adding rinse water into the spray tank.
Uncleaned packaging: Recommendation: Disposal must be made according to official regulations. Recommended cleansing agents: Water, if necessary together with cleansing agents.
14 Transport Information
UN-Number ADG, IMDG, IATA not regulated
UN proper shipping name ADG, IMDG, IATA not regulated
Transport hazard class(es) ADG, IMDG, IATA not regulated
Packing group ADG, IMDG, IATA not regulated
15 Regulatory Information
Australian Inventory of Industrial Chemicals All ingredients are listed or exempted from listing.
Standard for the Uniform Scheduling of Medicines and Poisons (Poison Standard) Schedule 5.
Australian Pesticides and Veterinary Medicines Authority This product is registered with the Australian Pesticides and Veterinary Medicines Authority. APVMA approval number: 67596.
16 Other Information
Abbreviations and acronyms: ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent
(Contd. on page 5)
Page 5 of 5
Safety Data Sheet according to WHS Regulations
Date of issue: 13.02.2026 Revision: 13.02.2026
Product name: PHOSFUSION 600 FUNGICIDE
(Contd. of page 4)
62.0.7
PBT: Persistent, Bioaccumulative and Toxic vPvB: very Persistent and very Bioaccumulative
Sources Safe Work Australia’s Code of Practice for Labelling of Workplace Hazardous Chemicals (under WHS Regulations). Australian Dangerous Goods Code.
Disclaimer This information is based upon the present state of our knowledge. This SDS has been compiled and is solely intended for this product. The information contained in this safety data sheet is provided in good faith and is believed to be accurate at the date of issuance. Nutrien Ag Solutions makes no representation of the accuracy or comprehensiveness of the information and to the full extent allowed by law excludes all liability for any loss or damage related to the supply or use of the information in this material safety data sheet.