SDS - CCC Chino 400SC Fungicide - 250114

COLIN CAMPBELL (CHEMICALS) PTY. LTD.

SAFETY DATA SHEET Date of Issue: 14 January 2025

SDS Chino 400SC Fungicide (2025) Page 1 of 7

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER

Product Name: CHINO 400SC TURF FUNGICIDE Other Names: Cyazofamid Chemical Group: Not specified CAS No.: 120116-88-3 Recommended Use: Fungicide for recreational turf. Supplier Details: Colin Campbell (Chemicals) Pty Ltd Contact: Product Development Manager – Emergency Telephone Number: 13 11 26 (Poisons Information Centre)

2. HAZARDS IDENTIFICATION

Based on available information, this material is not classified as hazardous according to criteria of Safe Work Australia GHS 7.

GHS classification: Acute Hazard to the Aquatic Environment - Category 1 Chronic Hazard to the Aquatic Environment - Category 1

GHS Signal Words: WARNING

Hazard Statements : H410 Very toxic to aquatic life with long lasting effects.

General Precautionary Statements : P102 : Keep out of reach of children P103 : Read carefully and follow instruction.

Pictograms : [Diagram: GHS pictogram for environmental hazard - a dead tree and a fish in a triangular frame]

Precautionary statements Prevention: P273 Avoid release to the environment.

---

COLIN CAMPBELL (CHEMICALS) PTY. LTD.

SAFETY DATA SHEET Date of Issue: 14 January 2025

SDS Chino 400SC Fungicide (2025) Page 2 of 7

Precautionary statements Response: P391 Collect spillage.

Storage : Not allocated.

Disposal: P501 Dispose of contents/container in accordance with local, regional, national and international regulations

Other information : S5 CAUTION

3. COMPOSITION/INFORMATION ON INGREDIENTS

4. FIRST AID MEASURES

If poisoning occurs, move out of dangerous area immediately contact a doctor or Poison Information Centre (Ph: 13 11 26) 126, New Zealand 0800 764 766, and follow the advice given. Show this Safety Data Sheet to the doctor.

If inhaled: Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist.

In case of skin contact: If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. If swelling, redness, blistering or irritation occurs seek medical assistance.

In case of eye contact: If in eyes wash out immediately with water. In all cases of eye contamination it is a sensible precaution to seek medical advice.

If swallowed: Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink. Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek medical advice.

First Aid facilities Ensure eye wash and safety shower are available.

Medical Attention: Treat symptomatically.

5. FIRE FIGHTING MEASURES

Extinguishing media If material is involved in a fire use alcohol resistant foam or dry agent (carbon dioxide, dry chemical powder).

Hazard from combustion products Non combustible. The major hazard in fires is usually inhalation of heated and toxic or oxygen deficient (or both) fire gases. There is little risk of an explosion from this product if commercial quantities are involved in a fire.

---

COLIN CAMPBELL (CHEMICALS) PTY. LTD.

SAFETY DATA SHEET Date of Issue: 14 January 2025

SDS Chino 400SC Fungicide (2025) Page 3 of 7

Precautions for fighting fires Fire fighters should wear full protective gear, including self-contained breathing apparatus (AS/NZS 1715/1716). Keep unnecessary people away. If it can be done safely remove intact containers from the fire. Bund area with sand or earth to prevent contamination of drains or waterways. Dispose of fire residues and contaminated fire extinguishing water in accordance with local regulations. Do not release contaminated water into the environment.

Hazchem Code •3Z

6. ACCIDENTAL RELEASE MEASURES

SMALL SPILLS Wear protective equipment to prevent skin and eye contamination. Avoid inhalation of vapours or dust. Wipe up with absorbent (clean rag or paper towels). Collect and seal in properly labelled containers or drums for disposal.

LARGE SPILLS Clear area of all unprotected personnel. Slippery when spilt. Avoid accidents, clean up immediately. Wear protective equipment to prevent skin and eye contamination and the inhalation of vapours. Work up wind or increase ventilation. Contain - prevent run off into drains and waterways. Use absorbent (soil, sand or other inert material). Collect and seal in properly labelled containers or drums for disposal. If contamination of crops, sewers or waterways has occurred advise local emergency services.

7. HANDLING AND STORAGE

Handling Avoid eye contact and repeated or prolonged skin contact. Avoid inhalation of vapour, mist or aerosols. After use and before eating, drinking or smoking wash hands, arms and face thoroughly with soap and water. After each day’s use wash gloves and contaminated clothing.

Storage Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from foodstuffs. Store away from incompatible materials described in Section 10. Store away from sources of heat and/or ignition. Keep container standing upright. Keep containers closed when not in use - check regularly for leaks. This material is classified as a Class 9 Miscellaneous Dangerous Good as per the criteria of the "Australian Code for the Transport of Dangerous Goods by Road & Rail" and/or the "New Zealand NZS5433: Transport of Dangerous Goods on Land" and must be stored in accordance with the relevant regulations. This material is a Scheduled Poison Schedule 5 (Caution) and must be stored, maintained and used in accordance with the relevant regulations

8. EXPOSURE CONTROL/PERSONAL PROTECTION

Exposure Standards

Exposure limits have not been established by SWA for any of the significant ingredients in this product.

Exposure standard – Time Weighted Average (TWA) means the average airborne concentration of a particular substance when calculated over a normal eight hour working day, for a five-day working week.

---

COLIN CAMPBELL (CHEMICALS) PTY. LTD.

SAFETY DATA SHEET Date of Issue: 14 January 2025

SDS Chino 400SC Fungicide (2025) Page 4 of 7

Short Term Exposure Limit (STEL) means the exposure level that may be equalled (but should not be exceeded for no longer than 15 minutes and should not be repeated more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL

Biological Limit Values As per the "National Model Regulations for the Control of Workplace Hazardous Substances (Safe Work Australia)" the ingredients in this material do not have a Biological Limit Allocated.

Engineering Controls Natural ventilation should be adequate under normal use conditions.

Personal Protective Equipment Eyes: Safety goggles. Eye wash bottle with pure water. Clothing: Impervious overalls buttoned to the neck and wrists. Gloves: Polyvinyl alcohol or nitrile-butyl-rubber gloves. Before removing gloves clean them with soap and water. Respiratory: Not necessary unless adequate ventilation is inadequate. If inhalation is likely an AS/NZS 1715/1716 approved respirator should be worn.

9. PHYSICAL AND CHEMICALS PROPERTIES

Appearance: White to off-white viscous liquid Odour: Slightly musty. pH: 5.5 – 7.5 as 1% aqueous suspension at 20OC Vapour pressure (active constituent): No data available Vapour density: Not available Boiling point: No data available Melting point: No data available Solubility: Disperses in water. Specific gravity: >1.09 Viscosity: 700 to 1100 cPS (Spindle 3 @ 20 RPM (CP) @ 2O°C) Flash point : No data available Flammability (explosive) limit: Not flammable Explosion risk: Not explosive Auto ignition temperature: No data available Partition coefficient (octanol/water): No data available

10. STABILITY AND REACTIVITY

Chemical stability: Stable when stored in the unopened sales container under normal warehouse conditions.

Conditions to avoid: Elevated temperatures and sources of ignition.

Incompatible materials : Oxidising agents.

---

COLIN CAMPBELL (CHEMICALS) PTY. LTD.

SAFETY DATA SHEET Date of Issue: 14 January 2025

SDS Chino 400SC Fungicide (2025) Page 5 of 7

Hazardous decomposition products: Oxides of carbon and nitrogen, smoke and other toxic fumes

Hazardous reactions: No known hazardous reactions.

11. TOXICOLOGICAL INFORMATION

No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs are:

Inhalation: This material has been classified as not hazardous for acute inhalation exposure. Acute toxicity estimate (based on ingredients): LC50 > 20.0 mg/L for vapours or LC50 > 5.0 mg/L for dust and mist.

Skin contact: This material has been classified as not hazardous for acute dermal exposure. Acute toxicity estimate (based on ingredients): LD50 > 2,000 mg/kg bw

Eye contact: This material has been classified as not corrosive or irritating to eyes.

Ingestion: This material has been classified as not hazardous for acute ingestion exposure. Acute toxicity estimate (based on ingredients): LD50 > 2,000 mg/kg bw

Chronic toxicity: Germ cell mutagenicity: This material has been classified as not a mutagen.

Carcinogenicity: This material has been classified as not a carcinogen.

Toxic to reproduction: This material has been classified as not a reproductive toxicant.

Specific target organ toxicity (repeated exposure): This material has been classified as not a specific hazard to target organs by repeat exposure.

Acute toxicity: Oral toxicity: This material has been classified as not hazardous for acute ingestion exposure. Acute toxicity estimate (based on ingredients): LD50 > 2,000 mg/kg bw

Dermal toxicity : This material has been classified as not hazardous for acute dermal exposure. Acute toxicity estimate (based on ingredients): LD50 > 2,000 mg/kg bw

Inhalation toxicity: This material has been classified as not hazardous for acute inhalation exposure. Acute toxicity estimate (based on ingredients): LC50 > 20.0 mg/L for vapours or LC50 > 5.0 mg/L for dust and mist.

Sensitisation: Inhalation: this material has been classified as not a respiratory sensitiser. Skin: this material has been classified as not a skin sensitiser.

Respiratory sensitisation This material has been classified as not an aspiration hazard.

---

COLIN CAMPBELL (CHEMICALS) PTY. LTD.

SAFETY DATA SHEET Date of Issue: 14 January 2025

SDS Chino 400SC Fungicide (2025) Page 6 of 7

Specific target organ toxicity (single exposure): This material has been classified as not a specific hazard to target organs by a single exposure.

12. ECOLOGICAL INFORMATION

Acutely toxic to aquatic organisms and may cause adverse effects in the aquatic environment. DO NOT contaminate streams, rivers or waterway with Chino or the used containers

Ecotoxicity: No information available

Environmental fate, persistence and degradability, mobility This material has been classified as a Category Chronic 1 Hazard. Non rapidly or rapidly degradable substance for which there are adequate chronic toxicity data available OR in the absence of chronic toxicity data, Acute toxicity estimate (based on ingredients): <1 mg/L, where the substance is not rapidly degradable and/or BCF ≥ 500 and/or log Kow ≥ 4.

Identified harmful effects on environment: No data available.

Other precautions: Do not contaminate dams, waterways or sewers with this product or used containers.

13. DISPOSAL CONSIDERATIONS

This product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used containers. Do not dispose of undiluted chemical on-site. Break, crush or puncture and bury empty containers in a local authority landfill. If no landfill is available bury the containers below 500mm in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt. Combustion possible in in suitable incineration plants (flue gas desulphurisation)

14. TRANSPORT INFORMATION

ADG CODE Not subject to the ADG Code when transported by road or rail in Australia, in packages 500kg(L) or less; or IBCs, but classed as Dangerous by IATA and IMDG/IMSBC when carried by air or sea transport (see details below).

MARINE TRANSPORT UN Number : 3082 Correct shipping name : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CYAZOFAMID) Dangerous Goods Class : Class 9 : Miscellaneous Dangerous Goods Packing Group : III

AIR TRANSPORT UN Number : 3082 Correct shipping name : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CYAZOFAMID) Dangerous Goods Class : Class 9 : Miscellaneous Dangerous Goods Packing Group : III

---

COLIN CAMPBELL (CHEMICALS) PTY. LTD.

SAFETY DATA SHEET Date of Issue: 14 January 2025

SDS Chino 400SC Fungicide (2025) Page 7 of 7

15. REGULATORY INFORMATION

Registered under the Agricultural and Veterinary Chemicals Act 1988 (Commonwealth) Australian Pesticides and Veterinary Medicines Authority approval number 94408. This material is not subject to the following international agreements: Montreal Protocol (Ozone depleting substances) The Stockholm Convention (Persistent Organic Pollutants) The Rotterdam Convention (Prior Informed Consent) Basel Convention (Hazardous Waste) International Convention for the Prevention of Pollution from Ships (MARPOL) This material/constituent(s) is covered by the following requirements: The Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) established under the Therapeutic Goods Act (Commonwealth): S5. Caution. AICIS Status: All components of this product are listed on or exempt from the Australian Inventory of Industrial Chemicals (AIIC).

16. OTHER INFORMATION

Date of revision : 14 January 2025 Reason for revision : New product and SDS.

This SDS summarises our best knowledge of the health and safety hazard information of the product and how to safely handle and use the product in the workplace. Each user should read this SDS and consider the information in the context of the how the product will be handled and used in the workplace including in conjunction with other products.

END OF SDS